data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 1 of 7 features for cdma, wcdma 850 and amps applications usable bandwidth 25 mhz (each band) high tx-rx isolation low insertion loss high attenuation single-ended operation no matching required for operation at 50 w ceramic surface mount package (smp) hermetic qualified for automotive applications manufacturing facilities are certified with iso/ts 16949:2002 rohs compliant (2002/95/ec), pb-free package pin configuration surface mount 3.80 x 3.80 x 1.47 mm bottom view smp-15f 12 10 11 9 4 5 6 7 8 1 3 2 pin no. description 5 rx 8 antenna 11 tx 1,2,3,4,6 case ground 7,9,10,12 case ground 1.60 0.60 3.80 0.45 0.80 1.47 nom. 1.65 max. 3.80 0.15x45 chamfer 0.90 0.86 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m m, over a 2 - 6 m m ni plating pb
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 2 of 7 electrical specifications (1) operating temperature: (2) +25 o c parameter (3) minimum typical maximum unit tx-ant specification center frequency - 836.5 - mhz maximum insertion loss (4) 824 - 849 mhz - 1.9 2.3 db amplitude ripple 824 - 849 mhz - 0.5 0.7 db absolute attenuation 10 - 750 mhz 869 - 894 mhz 1050 - 1100 mhz 1250 - 1325 mhz 24 45 20 14 30 50 24 18 - - - - db db db db second harmonic attenuation 1648 - 1698 mhz 7 10 - db third harmonic attenuation 2472 - 2547 mhz 8 12 - db return loss at tx terminal (4) 824 - 849 mhz 10 13 - db ant-rx specification center frequency - 881.5 - mhz maximum insertion loss (4) 869 - 894 mhz - 2.3 3.0 db amplitude ripple 869 - 894 mhz 869 - 894 mhz (over any 5mhz span) - - 0.6 0.4 1.2 0.8 db db absolute attenuation 10 - 779 mhz 779 - 804 mhz 824 - 849 mhz 1039 - 1065 mhz 1100 - 1270 mhz 1648 - 1698 mhz 2472 - 2547 mhz 3000 - 6000 mhz 25 34 52 30 36 35 20 7 32 38 56 38 42 42 27 10 - - - - - - - - db db db db db db db db return loss at rx terminal (4) 869 - 894 mhz 9 12 - db tx-rx specification tx to rx isolation 824 - 849 mhz 869 - 894 mhz 55 45 60 50 - - db db notes : 1. all specifications are based on the test circuit shown on page 6 2. this specification is valid for room temperature only. the specification over the full temperature range(s) is available on the next page(s) 3. electrical margin has been built into the design to account for the variations due to manufacturing tolerances 4. excluding losses due to pcb
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 3 of 7 electrical specifications (1) operating temperature range: (2) -30 to +85 o c parameter (3) minimum typical maximum unit tx-ant specification center frequency - 836.5 - mhz maximum insertion loss (4) 824 - 849 mhz - 1.9 2.3 db amplitude ripple 824 - 849 mhz - 0.6 1 db absolute attenuation 10 - 750 mhz 869 - 894 mhz 1050 - 1100 mhz 1250 - 1325 mhz 24 45 20 14 30 50 24 18 - - - - db db db db second harmonic attenuation 1648 - 1698 mhz 7 10 - db third harmonic attenuation 2472 - 2547 mhz 8 12 - db return loss at tx terminal (4) 824 - 849 mhz 10 12 - db ant-rx specification center frequency - 881.5 - mhz maximum insertion loss (4) 869 - 894 mhz - 2.6 3.2 db amplitude ripple 869 - 894 mhz 869 - 894 mhz (over any 5mhz span) - - 0.9 0.4 1.4 0.8 db db absolute attenuation 10 - 779 mhz 779 - 804 mhz 824 - 849 mhz 1039 - 1065 mhz 1100 - 1270 mhz 1648 - 1698 mhz 2472 - 2547 mhz 3000 - 6000 mhz 25 34 50 30 36 35 20 7 32 38 56 38 42 42 27 10 - - - - - - - - db db db db db db db db return loss at rx terminal (4) 869 - 894 mhz 9 12 - db tx-rx specification tx to rx isolation 824 - 849 mhz 869 - 894 mhz 54 45 60 49 - - db db notes : 1. all specifications are based on the test circuit shown on page 6 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. excluding losses due to pcb
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 4 of 7 electrical specifications (1) operating temperature range: (2) -40 to +85 o c parameter (3) minimum typical maximum unit tx-ant specification center frequency - 836.5 - mhz maximum insertion loss (4) 824 - 849 mhz - 1.9 2.5 db absolute attenuation dc - 800 mhz 869 - 894 mhz 1715 - 1785 mhz 12 42 7 30 50 10 - - - db db db second harmonic attenuation 1648 - 1698 mhz 7 10 - db third harmonic attenuation 2472 - 2547 mhz 8 12 - db return loss at tx terminal (4) 824 - 849 mhz 10 12 - db ant-rx specification center frequency - 881.5 - mhz maximum insertion loss (4) 869 - 894 mhz - 2.6 3.6 db absolute attenuation dc - 800 mhz 824 - 849 mhz 1738 - 1788 mhz 2604 - 2682 mhz 25 50 25 15 32 56 30 22 - - - - db db db db return loss at rx terminal (4) 869 - 894 mhz 9 12 - db tx-rx specification tx to rx isolation 824 - 849 mhz 869 - 894 mhz 54 44 60 49 - - db db notes : 1. all specifications are based on the test circuit shown on page 6 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. excluding losses due to pcb
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 5 of 7 typical performance
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 6 of 7 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4,6 7,9,10,12 8 11 5 ant 50 w ww w w ww w 50 50 w ww w 50 w single-ended input 1,2,3,4,6 7,9,10,12 8 11 5 ant 50 w ww w w ww w 50 50 w ww w marking pcb footprint id dot sawtek logo date code jjjym y code marking 1.11 4.01 0.65 0.14 0.80 1.60 0.15x45 chamfer the date code consists of: jjj = julian day, y = last digit of year, m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel ?1.5 2.0 0.3 8.0 4.0 4.1 4.1 1.8 1.75 5.5 12.0 ?1.5 a a section a-a ?330 direction of travel 2.0 ?13.0 ?20.2 2.7 12.8 ?102 sawtek logo id dot dimensions shown are nominal in millimeters packaging quantity: 4000 units/reel
data sheet part number 856356 836.5/881.5 mhz saw duplexer subject to change or obsolescence without notice rev e 01/09 ? triquint semiconductor page 7 of 7 maximum ratings parameter symbol minimum maximum unit operating temperature range t -30 +85 o c storage temperature range t stg -40 +85 o c rf power p in - +31 dbm important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jedec j-std-020c pb -free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
